iVTH Short Reports

With the short reports our members receive information about current projects.

Latest Short Reports published in 2023:

#1/23 - IGF 22885 N
Reliable production of bonded timber-concrete-composite elements
#2/23 - IGF 22428 N
Development of hybrid components made from steel and wood for increasing the load-bearing capacity and fire resistance of steel structures
#3/23 - IGF 21550 N
Tacitus FAQs - Elicitation and clarification of aspects for an economic utilization of hardwood constructions with glued-in rods
#4/23 - IGF 21285 N
Optimisation of the effective length method of timber members prone to lateral torsional buckling under combined bending and compression
#5/23 - IGF 21722 N
Timber-steel hybrid construction using the example of loadcarrying elements under bending stress – HoStaBau
#6/23 - IGF 22427 N
Positional imperfections with self-drilling screws in wood and wood-based materials
#7/23
Manufacture of construction products from plant residues and various binding agents
#8/23
Manufacture of construction products from plant residues and various binding agents
#9/23 - IGF 21822 N N
Development of a combined mechanical-climatic rapid-aging process for structural wood-based materials “TimberAge”
#10/23
Mycelium-based materials on the theater stage in Braunschweig
#11/23 - IGF 21993 N
Innovative and environmentallyfriendly intumescent flame-retardant coatings for decorative wood surfaces for exterior applications in building construction
#12/23 - IGF 45 LN
Braced fuel-cell end plates made from synthetic-resinimpregnated, compressed plywood
#13/23 - IGF 21979 N
Increasing the material utilization potential of lignin as protein-based stabilizing agent for the beverage industry
#14/23 - 21822 N
VOC emissions from sawn timber of various hardwoods and softwoods

Latest Short Reports published in 2022:

#1/22
KiefernStolz: Sustainable utilization potentials for large-dimension pine wood - a holistic examination of its volume, silviculture, harvesting and exploitation
#2/22
Material utilization of humins, a by-product of PEF production | Subproject: Humins for the bonding of wood
#3/22
Increasing the material utilization potential of lignin from the pulp industry as protein-based stabilizing agent for the beverage industry
#4/22 – 21993 N
Innovative and environmentally friendly intumescent flame-retardant coatings for decorative wood surfaces for exterior applications in building construction
#5/22
BonD – Bonding on Demand adhesives for the adhesion of cement- bonded wood-based panels for timber-panel construction
#6/22
MatLeicht - Material-efficient manufacture of products from lightweight hardwoods | Subproject: Optimization of wood-based materials from lightweight hardwoods through wood-species combination and fiber reinforcement
#7/22 – 22428 N
Development of hybrid components made from steel and wood for increasing the load-bearing capacity and fireresistance duration of steel structures
#8/22 – 21285 N
Optimization of the effective length method of timber members prone to lateral torsional buckling under combined bending and compression
#9/22 – 21550 N
Tacitus FAQs - Elicitation and clarification of aspects for an economic utilization of hardwood constructions with glued-in rods
#10/22– 21722 N
Timber-steel hybrid construction using the example of loadcarrying elements under bending stress – HoStaBau
#11/22
Long-term behavior of adhesivebonded wood hybrid systems for sustainable construction: Timber with fibre-plastic composite and timberconcrete composite
#12/22 - 22427 N
Positional imperfections with self-drilling screws in wood and wood-based materials
#13/22
Development of a sustainable guard rail system consisting of high load-bearing wood composite elements
#14/22 - 21822 N
Development of a combined mechanical- climatic accelerated aging method for structural wood-based materials “TimberAge“
#15/22 – 45 LN
Fuel-cell end plates made from wood-based materials
#16/22
Decrease of formaldehyde emission from low-emission particleboards due to aging
#17/22
A critical review of the TVOC value
#18/22
VOC emissions from selected hardwood sawn timber

Short Reports published in 2021:

#1/21
Optimization of material usage applications for softwoods from differing silvicultural systems
#2/21
Investigation of extractives types and proportions as a function of growing location and their influences on bonding
#3/21
AdLigno – Formaldehyde free adhesives for wood-based panels based on lignin and sugar derivatives
#4/21
Long-term test – weathering behavior of coated Wood-Plastic-Composites (WPC)
#5/21
FireCellCoat - Bio-inspired fire-protection coatings for wood, on the basis of microfibrillated cellulose
#6/21
GreenFront - Sustainable facade elements made of wood foam and textile concrete |Sub-project: Formulation development of wood foam
#7/21
Woodsupport - Development of a lightweight panel made from multi-layer plywood for the interior outfitting of ships
#8/21
Wood-cement hybrid systems for wall elements in timber construction
#9/21
Self-supporting free-form surfaces made from hardwood-veneer hybrid materials for utilization in pedestrian and bicycle bridges
#10/21– 20908 N
Avoidance of cracks in melamine-resin-impregnated coating papers for wood-based materials – Follow-up project
#11/21 - 21822 N
Development of a combined mechanical-climatic accelerated aging method for structural wood-based materials „TimberAge“
#12/21 - 21550 N
Tacitus FAQs - Elicitation and clarification of aspects for an economic utilization of hardwood constructions with glued-in rods
#13/21 - 20625 N
Economic dimensioning of timber structures through efficient steel-timber dowel connections
#14/21 - 21722 N
Timber-steel hybrid construction using the example of load-carrying elements under bending stress – HoStaBau
#15/21 - 21285 N
Optimization of the effective length method of timber members prone to lateral torsional buckling under combined bending and compression
#16/21 - 19906 N
Investigation of the requirements for the components of ETICS in wooden construction through the determination of the functional relationships of the properties of the system components
#17/21
Composite sheets based on polylactic acid (PLA) and sugar beet pulp: a solution to accelerate degradation of PLA in soil contact
#18/21
Determination of the formaldehyde emission of current low-emission particle boards as a steady-state concentration

Short Reports published in 2020:

# 1/20 – 19314 N
Analysis of wood chemistry - adhesive interactions and their effects on cohesive and adhesive bondings
# 2/20
Permanently hydrophobic binders for exterior coatings
# 3/20
Bonding of different (rotary cut veneer) woods with diverse adhesives
# 4/20
Europe-wide harmonization of tensile-strain testing of wood coatings
# 5/20 - 18693 N / 20908 N
Microcracks in direct coatings
# 6/20 - 19971 N
SPB wood – Further development of screw press-bonding in timber construction
# 7/20 - 20625 N
Economic dimensioning of wooden structures through efficient steel-timber dowel connections
# 8/20 - 19417 N
Economical production of high-quality timber-concrete-composite (TCC) elements via application of an innovative rapid-bonding technique and the use of hardwood – SpeedTeCC
# 9/20
Long-term behavior of adhesively-bonded wood-hybrid systems for sustainable buildings: Timber structures with fiberreinforced polymer (FRP) and timberconcrete composite (TCC) structures
# 10/20 - 19906 N
Investigation of the requirements for the components of ETICS in wooden construction through the determination of the functional relationships of the properties of the system components
# 11/20
Results from the FNR project Wood and Indoor Air (HoInRaLu)
# 12/20 - 19260 N
Optimberquake-Check | Development of a method for the reliable and simple evaluation of the earthquake resistance of one-to four-story timber buildings and simple hall structures in zones of low and medium seismicity
# 13/20
Development of a sustainable crash-barrier system made from highly stress-resistant woodcomposite elements
# 14/20
Recycling of balsa wood from rotor blades for the production of lightweight wood-based materials
# 15/20
BASAJAUN | Building a sustainable joint between rural and urban areas through circular and innovative wood construction value chains

Short Reports published in 2019:

# 1/19 – 19259 N
Hüttenzauber - Year-round quality-assured bonding of threaded rods in timber construction
# 2/19 - 19260 N
Development of a method for the reliable and simple evaluation of the earthquake resistance of one to fourstory timber buildings and simple hall structures in zones of low and medium seismicity
# 3/19 - 19314 N
Analysis of wood chemistry-adhesive interactions and their effects on cohesive and adhesive bondings
# 4/19 - 19417 N
Economical production of high-quality timber-concrete composite elements via application of an innovative rapid-bonding technique and the use of hardwood - SpeedTeCC
# 5/19 - 19499 N
iCurie - Construction site-optimized quick-curing in timber construction
# 6/19 - 19906 N
Investigation of the requirements for the components of ETICS in wooden construction through the determination of the functional relationships of the properties of the system components
# 7/19 - 19971 N
SPB wood – Further development of screw press-bonding in timber construction
# 8/19 - 20625 N
Economic dimensioning of wooden structures through efficient steel-timber dowel connections
# 9/19 - 575853-EPP-1-2016-1-ES-EPPKA2-SSA
IN4WOOD - Industry 4.0 for Wood and Furniture Manufacturers
# 10/19
General composition and temporal decrease of VOC concentrations in a wooden house
# 11/19
Specific composition and temporal decrease of VOC concentrations in a wooden house
# 12/19
Robinia – Investigations into the production of rotary cut veneers

Short Reports published in 2018:

# 1/18 – 19314 N
Analysis of wood chemistry-adhesive interactions and their effects on cohesive and adhesive bondings
# 2/18 - 18693 N
Influencing factors on crack formation in melamine resin coatings
# 3/18 - 19259 N
Hüttenzauber - High-quality gluing of threaded rods in timber construction all year round
# 4/18 - 19499N
iCurie - Construction site optimized fast-curing of adhesives for timber engineering
# 5/18 - 19417 N
Economical production of high-quality wood-concrete composite elements via application of an innovative rapid-bonding technique and the use of hardwood – SpeedTeCC
# 6/18 - 19971 N
SPB wood - Further development of screw press-bonding in timber construction
# 7/18 - 19906 N
Investigation of the requirements for the components of ETICS in wooden construction through the determination of the functional relationships of the properties of the system components
# 8/18 - 19260 N
Development of a method for the reliable and simple evaluation of the earthquake resistance of single- to four-story timber buildings and simple hall structures in zones of low and medium seismicity

Short Reports published in 2017:

# 1/17 – 18558 BG
Development of formaldehyde-free amino resins for the wood-based materials industry
# 2/17 - 19259 N
Hüttenzauber – Year-round Quality-assured Glued-in rods in timber construction
# 3/17 - 19499 N
iCurie - Construction site - Optimised Fast-curing in timber construction
# 4/17 - 19314 N
Analysis of wood chemistry-adhesive interactions and their effects on cohesive and adhesive bondings
# 5/17 - 18693 N
Determination of the degree of cure of melamine coatings by means of acid hydrolysis and UV spectroscopy
# 6/17 - 19260 N
Development of a method for the reliable and simple evaluation of the earthquake resistance of single to four-story wooden buildings and simple hall structures in zones of low and medium seismicity
# 7/17 - 19417 N
Economical production of high-quality wood-concrete composite elements via application of an innovative rapid-bonding technique and the use of hardwood – SpeedTeCC

Short Reports published in 2016:

# 1/16 – 18558 BG
Alternative formaldehyde-free urea resins for wood-based materials and decor papers
# 2/16
Development of low-formaldehyde dispersion adhesives on the basis of polyvinyl acetate and sugar derivatives for the production of wood-based materials “PVAc sugar adhesive”
# 3/16
Optimization of the gas analysis method for the determination of the formaldehyde release from wood-based materials »OptiGas 2020«
# 4/16 - 18266 N
TACITUS – Evaluation and modelling of the performance of hardwood glued-in rods made of steel and composite materials
# 5/16
Investigations into veneer production and the characteristic values of LVL
# 6/16 – 18557 N
Process simulation for the manufacture of decorative, three-dimensional molded veneer surfaces
# 7/16 – 18724 N / 18725 N
Vibroacoustics in the planning process for timber buildings: Modeling, numerical simulation, validation – Proposal Parts 3 and 4
# 8/16 – 18726 N
Vibroacoustics in the planning process for timber constructions: Frequency range-dependent modelling for the prognosis of the propagation of structure-borne sound in wooden buildings
# 9/16
Mechanisms of action for kiln drying of construction timber as protection against the house longhorn beetle (Hylotrupes bajulus)

Short Reports published in 2015:

# 1/15 –18557 BR
Process simulation for the production of decorative, three-dimensional molded veneer surfaces
# 2/15 – 18048 N
Holes in glulam beams arranged eccentrically or in groups
# 3/15 – 17856 N
Strategies fort he reduction of tensions during the renovation of multi-layer parquet
# 4/15
Reduction in formaldehyde release from installed particle boards through structural and decorative wall coverings
# 5/15
Investigation into the reactivity of isocyanate with MUF glue by means of infrared spectroscopy
# 6/15 – 484 ZN
Development of models fort he generation of hygrothermic characteristic values of wood-based materials fort he numerical simulation of the building element behavior
# 7/15 – 17411 N
End-of-life recycling of Wood Polymer Composites (WPC)
Part 1: Flexural and swelling characteristics of extruded profiles on the basis of homogeneous WPC recyclate
# 8/15 – 17411 ZN
End-of-life recycling of Wood Polymer Composites (WPC)
Part 2: Resistance to artificial weathering and natural aging
# 9/15 – 17411 N
End-of-life recycling of Wood Polymer Composites (WPC)
Part 3: Properties of WPC on the basis of mixed fractions from WPC recyclates and the use of WPC recyclate for the manufacture of new products

Short Reports published in 2014:

# 1/14 – 17644 N
Simulation-based development of light medium density fibreboard (MDF). Part 1: Fibre orientation
# 2/14 – 17644 N
Simulation-based development of light medium density fibreboard (MDF). Part 2: Two-scale simulation
# 3/14 – 17284 N
Bonding of various wood species and studies about their applicability in glued laminated timber
# 4/14 – 17311 N
Fast-curing adhesive systems for application in wooden panel construction
# 5/14 – 17441 N
Multi-layer solid wood panels with functional elements in the middle layer
# 6/14 – 17274 N
Studies on the bond strength of glued components made from wood and high-performance concrete through applied hygrothermal exposure of the adhesive joint
# 7/14 – 17328 N
Vibro-acoustics in the planning process for timber constructions: Modelling, numerical simulation, validation of project part 3 and 4
# 8/14 – 484 ZN
Development of models to generate hygrothermal characteristic values of wood-based panels for numerical simulation of component behaviour
# 9/14 – 17856 N
Predicting the ability to renovate multi-layer parquets
# 10/14 – 17070 N
Simplified fatigue verification of timber elements in timber and timber-concrete composite road bridges
# 11/14
Evaluation of a method for the sensory testing of building products for indoor applications under practical conditions
# 12/14 – 17411 N
Material recycling of wood-polymer composites (WPC)
# 13/14 – 17411N
Separation of PVC-based WPC in a sorting facility using near-infrared spectroscopy
# 14/14 – 16758 N
Guidelines for the vibroacoustic description of wooden ceilings and for evaluating and designing adapted vibration-protection systems

Former editions are also available in English language.

Last modified on: 2023-12-20 08:54:16 UTC
Source: https://ivth.org/en/publications/ivth-short-reports

News

12 April, 2024
Call for Papers: Wilhelm Klauditz-Prize for Wood Research and Environmental Protection 2024
more Information
24 July, 2024
CORNET - 38th International Call for Proposoals
more Information
9-11 October 2024
13th European Wood-based Panel Symposium, Hamburg Germany
more information:
www.european-wood-based-panel-symposium.org